CPC30111 – Certificate III in Bricklaying/Blocklaying
To achieve this qualification, the candidate must demonstrate competency in:
- 27 units of competency:
- 21 core units
- 6 elective units.
The elective units are to be chosen as follows:
- from Groups A and B
- up to 2 units from Certificate III or IV qualifications in CPC08 or another current Training Package, provided the integrity of the AQF alignment is ensured, and they contribute to a valid, industry-supported vocational outcome.
Some units in this qualification may have prerequisite requirements, which must be met when packaging the qualification. Users are referred to the list of CPC08 units with prerequisite unit requirements available in this Training Package for this purpose.
- Units
- Core Units
- Brick and blocklaying field of work
- Elective units
Units
CPCCCA3002A | Carry out setting out |
CPCCCM1012A | Work effectively and sustainably in the construction industry |
CPCCCM1013A | Plan and organise work |
CPCCCM1014A | Conduct workplace communication |
CPCCCM1015A | Carry out measurements and calculations |
CPCCCM2001A | Read and interpret plans and specifications |
CPCCCM2006B | Apply basic levelling procedures |
CPCCCM2008B | Erect and dismantle restricted height scaffolding |
CPCCCM2009A | Carry out basic demolition |
CPCCOHS2001A | Apply OHS requirements, policies and procedures in the construction industry |
CPCCBL2001A | Handle and prepare bricklaying and blocklaying materials |
CPCCBL2002A | Use bricklaying and blocklaying tools and equipment |
CPCCBL3002A | Carry out masonry veneer construction |
CPCCBL3003A | Carry out cavity brick construction |
CPCCBL3004A | Construct masonry steps and stairs |
CPCCBL3005A | Lay masonry walls and corners |
CPCCBL3006A | Lay multi-thickness walls and piers |
CPCCBL3009A | Install flashings and damp proof course |
CPCCBL3010A | Construct masonry arches |
CPCCBL3011A | Construct curved walls |
CPCCBL3014A | Install fire-rated masonry construction |
Group A: Advanced brick and blocklaying | |
CPCCBL3001A | Lay paving |
CPCCBL3007A | Install glass blockwork |
CPCCBL3012A | Construct fireplaces and chimneys |
CPCCBL3013A | Construct masonry structural systems |
CPCCBL3015A | Construct decorative brickwork |
CPCCBL3016A | Construct battered masonry walls and piers |
CPCCBL3017A | Carry out tuck pointing to brickwork |
CPCCBL3018A | Install aerated autoclaved concrete products |
Group B: General elective units | |
CPCCCM2007B | Use explosive power tools |
CPCCCM2010B | Work safely at heights |
CPCCCM3001C | Operate elevated work platforms |
CPCCCO2013A | Carry out concreting to simple forms |
CPCCSF2004A | Place and fix reinforcement materials |
BSBSMB301 | Investigate micro business opportunities |
BSBSMB406 | Manage small business finances |
Have questions?
CPC30211 – Certificate III in Carpentry
To achieve this qualification, the candidate must demonstrate competency in:
- 30 units of competency:
- 22 core units
- 8 elective units.
A maximum of two of the eight required elective units may be substituted by selecting relevant units of competency from any Certificate III or IV construction qualification or qualification in another endorsed Training Package.
Some units in this qualification may have prerequisite requirements, which must be met when packaging the qualification. Users are referred to the list of CPC08 units with prerequisite unit requirements available in this Training Package for this purpose.
- Units
- Core Units
- Construction and erection of frames, trusses, eaves and roofs field of work
- Elective Units
Units
CPCCCA2002B | Use carpentry tools and equipment |
CPCCCA2011A | Handle carpentry materials |
CPCCCA3001A | Carry out general demolition of minor building structures |
CPCCCA3002A | Carry out setting out |
CPCCCA3023A | Carry out levelling operations |
CPCCCM1012A | Work effectively and sustainably in the construction industry |
CPCCCM1013A | Plan and organise work |
CPCCCM1014A | Conduct workplace communication |
CPCCCM1015A | Carry out measurements and calculations |
CPCCCM2001A | Read and interpret plans and specifications |
CPCCCM2002A | Carry out excavation |
CPCCCM2007B | Use explosive power tools |
CPCCCM2008B | Erect and dismantle restricted height scaffolding |
CPCCCM2010B | Work safely at heights |
CPCCCO2013A | Carry out concreting to simple forms |
CPCCOHS2001A | Apply OHS requirements, policies and procedures in the construction industry |
CPCCCA3003A | Install flooring systems |
CPCCCA3004A | Construct wall frames |
CPCCCA3005B | Construct ceiling frames |
CPCCCA3006B | Erect roof trusses |
CPCCCA3007C | Construct pitched roofs |
CPCCCA3008B | Construct eaves |
Installation field of work | |
CPCCCA3010A | Install and replace windows and doors |
CPCCCA3012A | Frame and fit wet area fixtures |
CPCCCA3013A | Install lining, panelling and moulding |
CPCCCA3016A | Construct timber external stairs |
Formwork construction field of work | |
CPCCCA3018A | Construct, erect and dismantle formwork for stairs and ramps |
CPCCCA3019A | Erect and dismantle formwork to suspended slabs, columns, beams and walls |
CPCCCA3020A | Erect and dismantle jump form formwork |
CPCCCA3021A | Erect and dismantle slip form formwork |
General electives | |
BSBSMB301 | Investigate micro business opportunities |
BSBSMB406 | Manage small business finances |
CPCCCA2003A | Erect and dismantle formwork for footings and slabs on ground |
CPCCCA3009B | Construct advanced roofs |
CPCCCA3011A | Refurbish timber sashes to window frames |
CPCCCA3014A | Construct bulkheads |
CPCCCA3015A | Assemble partitions |
CPCCCA3017B | Install exterior cladding |
CPCCCA3022A | Install curtain walling |
CPCCCM3001C | Operate elevated work platforms |
CPCCSF2003A | Cut and bend materials using oxy-LPG equipment |
CPCCSF2004A | Place and fix reinforcement materials |
CPCCWC3003A | Install dry wall passive fire-rated systems |
RIICCM210D | Install trench support |
RIIWHS202D | Enter and work in confined spaces |
RIIWMG203D | Drain and dewater civil construction site |
CPC30318 – Certificate III in Concreting
To achieve this qualification, the candidate must demonstrate competency in:
• 20 units of competency:
• 15 core units
• 5 elective units.
- a minimum of three elective units must be chosen from the Group A concreting elective units listed below
- the remaining two elective units may be chosen from:
- the remaining Group A concreting elective units listed below
- the Group B general elective units listed below
- other units packaged in a Certificate III or Certificate IV qualification in the CPC Construction, Plumbing and Services Training Package, CPC08 Construction, Plumbing and Services Training Package, or other current Training Packages or accredited courses provided they do not duplicate the outcome of another unit already chosen for the qualification.
• Units
• Core Units
• Concreter
• Concrete tilt panel fabricator
• Elective units
Units
CORE UNITS
CPCCCA2003 |
Erect and dismantle formwork for footings and slabs on ground |
CPCCCM1012 |
Work effectively and sustainably in the construction industry |
CPCCCM1013 |
Plan and organise work |
CPCCCM1014 |
Conduct workplace communication |
CPCCCM1015 |
Carry out measurements and calculations |
CPCCCM2001 |
Read and interpret plans and specifications |
CPCCCM2006 |
Apply basic levelling procedures |
CPCCCO2021 |
Handle concreting materials |
CPCCCO2022 |
Select, check and maintain concreting plant, tools and equipment |
CPCCCO3041 |
Place concrete |
CPCCCO3042 |
Finish concrete |
CPCCCO3043 |
Cure concrete |
CPCCCO3053 |
Slump-test concrete |
CPCCSF2004 |
Place and fix reinforcement materials |
CPCCWHS2001 |
Apply WHS requirements, policies and procedures in the construction industry |
Group A: Concreting elective units |
||||
CPCCCO3035* |
Assess and specify concrete supply requirements |
|||
CPCCCO3036* |
Plan concrete work and brief team |
|||
CPCCCO3044* |
Apply decorative finishes to concrete |
|||
CPCCCO3046* |
Repair and rectify concrete |
|||
CPCCCO3047* |
Cut and core concrete |
|||
CPCCCO3048* |
Construct tilt panels on site |
|||
CPCCCO3049* |
Apply and finish sprayed concrete |
|||
CPCCCO3050* |
Carry out high performance concreting |
|||
CPCCCO3051* |
Conduct off-form vertical concrete operations |
|||
CPCCCO3052* |
Conduct concrete boom delivery operations |
|||
CPCCCO3054* |
Operate concrete agitator trucks |
|||
CPCCCO3055* |
Install topping slabs |
|||
Group B: General elective units |
|
|||
CPCCCA3001* |
Carry out general demolition of minor building structures |
|
||
CPCCCM1016 |
Identify requirements for safe tilt-up work |
|
||
CPCCCM2007* |
Use explosive power tools |
|
||
CPCCCM2008* |
Erect and dismantle restricted height scaffolding |
|
||
CPCCLBM3001 |
Licence to operate a concrete placing boom |
|
||
CPCCSF2003* |
Cut and bend materials using oxy-LPG equipment |
|
||
CPCCSF3001* |
Apply reinforcement schedule |
|
CPC30611 – Certificate III in Painting and Decorating
To achieve this qualification, the candidate must demonstrate competency in:
· 27 units of competency:
· 23 core units
· 4 elective units.
A maximum of two of the four required elective units may be substituted by selecting relevant units of competency from any Certificate III or IV construction qualification or qualification in another endorsed Training Package.
Some units in this qualification may have prerequisite requirements, which must be met when packaging the qualification. Users are referred to the list of CPC08 units with prerequisite unit requirements available in this Training Package for this purpose.
Units
CPCCCM1012A | Work effectively and sustainably in the construction industry |
CPCCCM1013A | Plan and organise work |
CPCCCM1014A | Conduct workplace communication |
CPCCCM1015A | Carry out measurements and calculations |
CPCCCM2001A | Read and interpret plans and specifications |
CPCCCM2003B | Calculate and cost construction work |
CPCCCM2010B | Work safely at heights |
CPCCOHS2001A | Apply OHS requirements, policies and procedures in the construction industry |
CPCCCM3001C | Operate elevated work platforms |
CPCCPB3026B | Erect and maintain trestle and plank systems |
CPCCPD2011A | Handle painting and decorating materials |
CPCCPD2012A | Use painting and decorating tools and equipment |
CPCCPD2013A | Remove and replace doors and door and window components |
CPCCPD3021A | Prepare surfaces for painting |
CPCCCM2008B | Erect and dismantle restricted height scaffolding |
CPCCPD3022A | Apply paint by brush and roller |
CPCCPD3023A | Apply texture coat paint finishes by brush, roller and spray |
CPCCPD3024A | Apply paint by spray |
CPCCPD3025A | Match specified paint colour |
CPCCPD3026A | Apply stains and clear timber finishes |
CPCCPD3027A | Apply wallpaper |
CPCCPD3028A | Apply decorative paint finishes |
CPCCPD3031A | Implement safe lead paint and asbestos work practices in the painting industry |
Specialist painting and decorating field of work | |
CPCCPD3029A | Remove graffiti and apply protective coatings |
CPCCPD3030B | Apply protective paint coating systems |
CPCCPD3032A | Apply advanced wallpaper techniques |
CPCCPD3033A | Apply intumescent coatings |
CPCCPD3034A | Apply advanced decorative paint finishes |
CPCCSP3003A | Apply trowelled texture coat finishes |
General electives | |
BSBSMB301 | Investigate micro business opportunities |
BSBSMB406 | Manage small business finances |
LMFGG2008B | Glaze/re-glaze residential windows and doors |
CPC31211 – Certificate III in Wall and Ceiling Lining
To achieve this qualification, the candidate must demonstrate competency in:
- 26 units of competency:
- 19 core units
- 7 elective units.
A maximum of two of the seven required elective units may be substituted by selecting relevant units of competency from any Certificate III or IV construction qualification or qualification in another endorsed Training Package.
Some units in this qualification may have prerequisite requirements, which must be met when packaging the qualification. Users are referred to the list of CPC08 units with prerequisite unit requirements available in this Training Package for this purpose.
- Units
- Core Units
- Fixing (hanging) field of work
- Finishing (stopping, sanding and cornices) field of work
- Elective units
Units
CPCCCM1012A | Work effectively and sustainably in the construction industry |
CPCCCM1013A | Plan and organise work |
CPCCCM1014A | Conduct workplace communication |
CPCCCM1015A | Carry out measurements and calculations |
CPCCCM2001A | Read and interpret plans and specifications |
CPCCCM2010B | Work safely at heights |
CPCCOHS2001A | Apply OHS requirements, policies and procedures in the construction industry |
CPCCPB3001A | Fix standard plasterboard wall sheets |
CPCCPB3002A | Fix standard plasterboard ceiling sheets |
CPCCPB3003A | Fix battens |
CPCCPB3004A | Fix wet area sheets |
CPCCPB3005A | Fix ceiling sheets to external protected areas |
CPCCPB3006A | Fix fibre cement board |
CPCCPB3007A | Apply levels of finish standards to planning and inspection of own work |
CPCCPB3008A | Mix plastering compounds |
CPCCPB3009A | Finish plasterboard joins manually |
CPCCPB3010A | Manually sand plaster work |
CPCCPB3011A | Finish category 1 and 2 wet areas |
CPCCPB3012A | Cut and fix paper-faced cornices |
Commercial wall and ceiling lining field of work | |
CPCCCA3014A | Construct bulkheads |
CPCCCA3015A | Assemble partitions |
CPCCCM2006B | Apply basic levelling procedures |
CPCCCM2007B | Use explosive power tools |
CPCCWC3001A | Install and finish plasterboard and fibre cement sheeting to curved walls and ceilings |
CPCCWC3003A | Install dry wall passive fire-rated systems |
CPCCWC3004A | Install suspended ceilings |
Plasterboard handling field of work | |
CPCCPB3023A | Load and unload plaster and plaster-related products |
CPCCPB3024A | Use manual handling equipment to manoeuvre plaster products |
CPCCPB3025A | Store plasterboard and related products |
General electives | |
BSBSMB301 | Investigate micro business opportunities |
BSBSMB406 | Manage small business finances |
CPCCCA3001A | Carry out general demolition of minor building structures |
CPCCCM2008B | Erect and dismantle restricted height scaffolding |
CPCCCM3001C | Operate elevated work platforms |
CPCCPB3013A | Plan travel routes |
CPCCPB3014A | Install batt insulation products |
CPCCPB3015A | Install acoustic and thermal environmental protection systems |
CPCCPB3016A | Install and finish columns |
CPCCPB3017A | Rectify faults in plaster applications |
CPCCPB3018A | Use vacuum and electric sanding equipment to finish plaster work |
CPCCPB3019A | Inspect equipment for serviceability |
CPCCPB3020A | Match, mitre and install cast ornamental cornices |
CPCCPB3021A | Install and fix residential acoustic plaster products |
CPCCPB3022A | Use mechanical jointing equipment to finish joints |
CPCCPB3026B | Erect and maintain trestle and plank systems |
CPCCPB3027A | Install ceiling insulation |
CPCCSP3003A | Apply trowelled texture coat finishes |
CPCCSP3005A | Install pre-cast decorative mouldings |
CPCCWC2001A | Complete penetrations and flashings |
CPCCWC3002A | Install and finish plasterboard and fibre cement sheeting to arches |
CPC31311 – Certificate III in Wall and Floor Tiling
To achieve this qualification, the candidate must demonstrate competency in:
- 19 units of competency:
- 16 core units
- 3 elective units.
A maximum of one of the three required elective units may be substituted by selecting relevant units of competency from any Certificate III or IV construction qualification or qualification in another endorsed Training Package.
Some units in this qualification may have prerequisite requirements, which must be met when packaging the qualification. Users are referred to the list of CPC08 units with prerequisite unit requirements available in this Training Package for this purpose.
- Units
- Core Units
- Wall and floor tiling field of work
- Elective units
Units
CPCCCM1012A | Work effectively and sustainably in the construction industry |
CPCCCM1013A | Plan and organise work |
CPCCCM1014A | Conduct workplace communication |
CPCCCM1015A | Carry out measurements and calculations |
CPCCCM2001A | Read and interpret plans and specifications |
CPCCCM2006B | Apply basic levelling procedures |
CPCCOHS2001A | Apply OHS requirements, policies and procedures in the construction industry |
CPCCWF2001A | Handle wall and floor tiling materials |
CPCCWF2002A | Use wall and floor tiling tools and equipment |
CPCCWF3001A | Prepare surfaces for tiling application |
CPCCWF3002A | Fix floor tiles |
CPCCWF3003A | Fix wall tiles |
CPCCWF3004A | Repair wall and floor tiles |
CPCCWF3006A | Carry out mosaic tiling |
CPCCWF3007A | Tile curved surfaces |
CPCCWP3002A | Apply waterproofing process to internal wet areas |
Advanced tiling field of work | |
Carry out decorative tiling | |
Tile domestic pools and spas | |
General electives | |
Investigate micro business opportunities | |
Manage small business finances | |
Erect and dismantle restricted height scaffolding | |
Work safely at heights | |
Operate elevated work platforms | |
Carry out concreting to simple forms |
CPC31411 – Certificate III in Construction Waterproofing
To achieve this qualification, the candidate must demonstrate competency in:
- 19 units of competency:
- 14 core units
- 5 elective units.
A maximum of two of the five required elective units may be substituted by selecting relevant units of competency from any Certificate III or IV construction qualification or qualification in another endorsed Training Package.
Some units in this qualification may have prerequisite requirements, which must be met when packaging the qualification. Users are referred to the list of CPC08 units with prerequisite unit requirements available in this Training Package for this purpose.
- Units
- Core Units
- Waterproofing preparation field of work
- Waterproofing operations field of work
- Elective units
Units
CPCCCM1012A | Work effectively and sustainably in the construction industry |
CPCCCM1013A | Plan and organise work |
CPCCCM1014A | Conduct workplace communication |
CPCCCM1015A | Carry out measurements and calculations |
CPCCCM2001A | Read and interpret plans and specifications |
CPCCOHS2001A | Apply OHS requirements, policies and procedures in the construction industry |
CPCCWP2001A | Handle waterproofing materials |
CPCCWP2002A | Use waterproofing tools and equipment |
CPCCWP2003A | Prepare for construction waterproofing process |
CPCCWP2004A | Prepare surfaces for waterproofing application |
CPCCWP3001A | Apply waterproofing process to below ground level wet areas |
CPCCWP3002A | Apply waterproofing process to internal wet areas |
CPCCWP3003A | Apply waterproofing process to external wet areas |
CPCCWP3004A | Apply waterproofing remedial processes |
BSBSMB301 | Investigate micro business opportunities |
BSBSMB406 | Manage small business finances |
CPCCCA3012A | Frame and fit wet area fixtures |
CPCCCM2002A | Carry out excavation |
CPCCCM2006B | Apply basic levelling procedures |
CPCCCM2007B | Use explosive power tools |
CPCCCM2008B | Erect and dismantle restricted height scaffolding |
CPCCCM2009A | Carry out basic demolition |
CPCCCM2010B | Work safely at heights |
CPCCCM3001C | Operate elevated work platforms |
CPCCCO2013A | Carry out concreting to simple forms |
CPCCSH2003A | Apply and install sealant and sealant devices |
CPC31511 – Certificate III in Formwork/Falsework
To achieve this qualification, the candidate must demonstrate competency in:
- 25 units of competency:
- 19 core units
- 6 elective units.
A maximum of two of the required six elective units may be substituted by selecting relevant units of competency from any Certificate III or IV construction qualification or qualification in another endorsed Training Package.
Some units in this qualification may have prerequisite requirements, which must be met when packaging the qualification. Users are referred to the list of CPC08 units with prerequisite unit requirements available in this Training Package for this purpose.
- Units
- Core Units
- Formwork construction field of work
- Elective units
Units
CPCCCA2002B | Use carpentry tools and equipment |
CPCCCA2011A | Handle carpentry materials |
CPCCCA3001A | Carry out general demolition of minor building structures |
CPCCCA3002A | Carry out setting out |
CPCCCA3023A | Carry out levelling operations |
CPCCCM1012A | Work effectively and sustainably in the construction industry |
CPCCCM1013A | Plan and organise work |
CPCCCM1014A | Conduct workplace communication |
CPCCCM1015A | Carry out measurements and calculations |
CPCCCM2001A | Read and interpret plans and specifications |
CPCCCM2002A | Carry out excavation |
CPCCCM2007B | Use explosive power tools |
CPCCCM2008B | Erect and dismantle restricted height scaffolding |
CPCCCM2010B | Work safely at heights |
CPCCCO2013A | Carry out concreting to simple forms |
CPCCOHS2001A | Apply OHS requirements, policies and procedures in the construction industry |
CPCCCA2003A | Erect and dismantle formwork for footings and slabs on ground |
CPCCCA3018A | Construct, erect and dismantle formwork for stairs and ramps |
CPCCCA3019A | Erect and dismantle formwork to suspended slabs, columns, beams and walls |
BSBSMB301 | Investigate micro business opportunities |
BSBSMB406 | Manage small business finances |
CPCCCA3014A | Construct bulkheads |
CPCCCA3015A | Assemble partitions |
CPCCCA3016A | Construct timber external stairs |
CPCCCA3020A | Erect and dismantle jump form formwork |
CPCCCA3021A | Erect and dismantle slip form formwork |
CPCCCA3022A | Install curtain walling |
CPCCCM3001C | Operate elevated work platforms |
CPCCSF2003A | Cut and bend materials using oxy-LPG equipment |
CPCCSF2004A | Place and fix reinforcement materials |
CPCCWC3003A | Install dry wall passive fire-rated systems |
RIICCM210D | Install trench support |
RIIWHS202D | Enter and work in confined spaces |
RIIWMG203D | Drain and dewater civil construction site |
CPC32313 – Certificate III in Stonemasonry (Monumental/Installation)
To achieve this qualification, the candidate must demonstrate competency in:
- 30 units of competency:
- 21 core units
- 9 elective units.
The elective units must ensure the integrity of the AQF alignment and contribute to a valid, industry-supported vocational outcome and are to be chosen as follows:
- 9 units from the elective units listed below
- 2 of the units may be chosen from other Certificate III qualifications in CPC08 or another current Training Package or accredited course.
Some units in this qualification may have prerequisite requirements, which must be met when packaging the qualification. Users are referred to the list of CPC08 units with prerequisite unit requirements available in this Training Package for this purpose.
- Units
- Core Units
- Elective units
Units
CPCCCA3002A | Carry out setting out |
CPCCCA3023A | Carry out levelling operations |
CPCCCM1012A | Work effectively and sustainably in the construction industry |
CPCCCM1013A | Plan and organise work |
CPCCCM1014A | Conduct workplace communication |
CPCCCM1015A | Carry out measurements and calculations |
CPCCCM2001A | Read and interpret plans and specifications |
CPCCCM2002A | Carry out excavation |
CPCCCM2005B | Use construction tools and equipment |
CPCCCM2008B | Erect and dismantle restricted height scaffolding |
CPCCCO2013A | Carry out concreting to simple forms |
CPCCOHS2001A | Apply OHS requirements, policies and procedures in the construction industry |
CPCCST2003A | Finish stone |
CPCCST2004A | Lay stone |
CPCCST2006A | Identify and use stone products |
CPCCST3001A | Dress and mould stone |
CPCCST3002A | Shape solid stone |
CPCCST3003A | Split stone manually |
CPCCST3004A | Dress stone manually |
CPCCST3006A | Machine stone |
CPCCST3022A | Carry out profile work |
BSBSMB301 | Investigate micro business opportunities |
BSBSMB406 | Manage small business finances |
CPCCBL3016A | Construct battered masonry walls and piers |
CPCCCA3014A | Construct bulkheads |
CPCCCM2007B | Use explosive power tools |
CPCCCM2009A | Carry out basic demolition |
CPCCCM2010B | Work safely at heights |
CPCCCM3001C | Operate elevated work platforms |
CPCCJN2001A | Assemble components |
CPCCJN2003A | Package manufactured products for transport |
CPCCPA3001A | Prepare subgrade, base and bedding course for segmental paving |
CPCCPA3002A | Lay segmental pavers |
CPCCPA3003A | Cut segmental pavers |
CPCCST2005A | Carry out load slinging of off-site materials |
CPCCST3007A | Turn stone |
CPCCST3009A | Use computer-controlled static machinery to produce stone components |
CPCCST3010A | Set out and cut letters in stone |
CPCCST3011A | Plan monument construction |
CPCCST3012A | Build stone veneer walls |
CPCCST3013A | Carry out cemetery monument fixing |
CPCCST3014A | Set and anchor stone facades |
CPCCST3015A | Apply gilding to stone |
CPCCST3016A | Build solid stonemasonry walls |
CPCCST3017A | Construct stone arches |
CPCCST3018A | Inlay lead to stone |
CPCCST3019A | Lay stonemasonry stairs |
CPCCST3020A | Produce reconstituted stone |
CPCCST3021A | Renovate and restore stone work |
CPC40110 – Certificate IV in Building and Construction (Building)
To achieve this qualification, the candidate must demonstrate competency in:
- 16 units of competency:
- 13 core units
- 3 elective units.
The elective units must be selected as follows:
- all three elective units may be selected from the elective units listed below
- two of the three elective units may be selected from Certificate III, Certificate IV or Diploma from another endorsed Training Package or from CPC08, provided that at least one unit is from Certificate IV and the industry context is maintained.
Some units in this qualification may have prerequisite requirements, which must be met when packaging the qualification. Users are referred to the list of CPC08 units with prerequisite unit requirements available in this Training Package for this purpose.
- Units
- Core Units
- Elective units
Units
BSBSMB406A | Manage small business finances |
CPCCBC4001A | Apply building codes and standards to the construction process for low rise building projects |
CPCCBC4002A | Manage occupational health and safety in the building and construction workplace |
CPCCBC4003A | Select and prepare a construction contract |
CPCCBC4004A | Identify and produce estimated costs for building and construction projects |
CPCCBC4005A | Produce labour and material schedules for ordering |
CPCCBC4006B | Select, procure and store construction materials for low rise projects |
CPCCBC4007A | Plan building or construction work |
CPCCBC4008B | Conduct on-site supervision of building and construction projects |
CPCCBC4009B | Apply legal requirements to building and construction projects |
CPCCBC4010B | Apply structural principles to residential low rise constructions |
CPCCBC4011B | Apply structural principles to commercial low rise constructions |
CPCCBC4012B | Read and interpret plans and specifications |
BSBLDR403 | Promote team effectiveness |
BSBITU201 | Produce simple word processed documents |
BSBITU202 | Create and use spreadsheets |
BSBITU301 | Create and use databases |
BSBMGT403 | Implement continuous improvement |
BSBPMG411 | Apply project quality management techniques |
BSBPMG415 | Apply project risk management techniques |
BSBPMG522 | Undertake project work |
BSBSMB401 | Establish legal and risk management requirements of small business |
BSBSMB402 | Plan small business finances |
BSBSMB404 | Undertake small business planning |
BSBSMB405 | Monitor and manage small business operations |
BSBLDR402 | Lead effective workplace relationships |
BSBWRT401 | Write complex documents |
CPCCBC4013A | Prepare and evaluate tender documentation |
CPCCBC4014A | Prepare simple building sketches and drawings |
CPCCBC4015A | Prepare specifications for all construction works |
CPCCBC4016A | Administer a construction contract |
CPCCBC4017A | Arrange resources and prepare for the building or construction project |
CPCCBC4018A | Apply site surveys and set-out procedures to building and construction projects |
CPCCBC4019A | Apply sustainable building design principles to water management systems |
CPCCBC4020A | Build thermally efficient and sustainable structures |
CPCCBC4021A | Minimise waste on the building and construction site |
CPCCBC4022A | Supervise tilt-up work |
CPCCBC4024A | Resolve business disputes |
CPCCBC4025A | Manage personal work priorities and professional development |
CPCCBC4026A | Arrange building applications and approvals |
CPCCBC4051A | Supervise asbestos removal |
CPCCWHS1001 | Prepare to work safely in the construction industry |
CPCSUS4001A | Implement and monitor environmentally sustainable work practices |
CPCSUS4002A | Use building science principles to construct energy efficient buildings |
CPCSUS4003A | Maximise energy efficiency through applied trade skills |
HLTHIR403C | Work effectively with culturally diverse clients and co-workers |
TAEDEL402 | Plan, organise and facilitate learning in the workplace |
CPC50210 – Diploma of Building and Construction (Building)
To achieve this qualification, the candidate must demonstrate competency in:
- 18 units of competency:
- 13 core units
- 5 elective units.
The elective units must be selected as follows:
- a minimum of 3 elective units must be from Group A units below
- a maximum of 2 further elective units may be from Group B units below
- 1 elective unit may be from Diploma level in from CPC08 or another endorsed Training Package, provided that the industry context of the qualification is maintained
- 2 elective units may be from any Certificate IV in CPC08
- 1 elective unit may be from any Advanced Diploma in CPC08.
- Some units in this qualification may have prerequisite requirements, which must be met when packaging the qualification. Users are referred to the list of CPC08 units with prerequisite unit requirements available in this Training Package for this purpose.
- Units
- Core Units
- Elective units
Units
BSBOHS504B | Apply principles of OHS risk management |
BSBPMG505A | Manage project quality |
BSBPMG508A | Manage project risk |
CPCCBC4001A | Apply building codes and standards to the construction process for low rise building projects |
CPCCBC4003A | Select and prepare a construction contract |
CPCCBC4004A | Identify and produce estimated costs for building and construction projects |
CPCCBC4010B | Apply structural principles to residential low rise constructions |
CPCCBC4013A | Prepare and evaluate tender documentation |
CPCCBC5001B | Apply building codes and standards to the construction process for medium rise building projects |
CPCCBC5002A | Monitor costing systems on medium rise building and construction projects |
CPCCBC5003A | Supervise the planning of on-site medium rise building or construction work |
CPCCBC5010B | Manage construction work |
CPCCBC5018A | Apply structural principles to the construction of medium rise buildings |
Elective units – Group A | |
CPCCBC5004A | Supervise and apply quality standards to the selection of building and construction materials |
CPCCBC5005A | Select and manage building and construction contractors |
CPCCBC5006B | Apply site surveys and set-out procedures to medium rise building projects |
CPCCBC5007B | Administer the legal obligations of a building or construction contractor |
CPCCBC5009A | Identify services layout and connection methods to medium rise construction projects |
CPCCBC5011A | Manage environmental management practices and processes in building and construction |
CPCCBC5012A | Manage the application and monitoring of energy conservation and management practices and processes |
CPCCBC5013A | Develop professional technical and legal reports on building and construction projects |
CPCSUS5001A | Develop workplace policies and procedures for sustainability |
CPCSUS5002A | Develop action plans to retrofit existing buildings for energy efficiency |
CPCSUS5003A | Manage energy efficient building methods and strategies |
Elective units – Group B | |
BSBCUS501 | Manage quality customer service |
BSBFIM501 | Manage budgets and financial plans |
BSBHRM509 | Manage rehabilitation or return to work programs |
BSBINN502 | Build and sustain an innovative work environment |
BSBITA401 | Design databases |
BSBITU402 | Develop and use complex spreadsheets |
BSBITU404 | Produce complex desktop published documents |
BSBLED502 | Manage programs that promote personal effectiveness |
BSBMGT502 | Manage people performance |
BSBMGT517 | Manage operational plan |
BSBRSK501 | Manage risk |
BSBSLS502 | Lead and manage a sales team |
BSBWOR501 | Manage personal work priorities and professional development |
BSBWOR502 | Lead team effectiveness |
CPCCBC4005A | Produce labour and material schedules for ordering |
CPCCBC4006B | Select, procure and store construction materials for low rise projects |
CPCCBC4009B | Apply legal requirements to building and construction projects |
CPCCBC4011B | Apply structural principles to commercial low rise constructions |
CPCCBC4012B | Read and interpret plans and specifications |
CPCCBC4014A | Prepare simple building sketches and drawings |
CPCCBC4018A | Apply site surveys and set-out procedures to building and construction projects |
CPCCBC4024A | Resolve business disputes |
CPCCBC5004A | Supervise and apply quality standards to the selection of building and construction materials |
CPCCBC5005A | Select and manage building and construction contractors |
CPCCBC5006B | Apply site surveys and set-out procedures to medium rise building projects |
CPCCBC5007B | Administer the legal obligations of a building or construction contractor |
CPCCBC5009A | Identify services layout and connection methods to medium rise construction projects |
CPCCBC5011A | Manage environmental management practices and processes in building and construction |
CPCCBC5012A | Manage the application and monitoring of energy conservation and management practices and processes |
CPCCBC5013A | Develop professional technical and legal reports on building and construction projects |
CPCCBC5014A | Conduct asbestos assessment associated with removal |
CPCCWHS1001 | Prepare to work safely in the construction industry |
CPPDSM5022A | Implement asset management plan |
BSB51415 – Diploma of Project Management
Total number of units = 12
8 core unit’s plus
4 elective units, of which:
- 4 elective units may be selected from the elective units listed below or any endorsed Training Package or accredited course at Diploma level or higher.
- Elective units must be relevant to the work environment and the qualification, maintain the integrity of the AQF alignment and contribute to a valid, industry-supported vocational outcome. They must not include the choice of the unit BSBPMG522 Undertake project work.
- Units
- Core Units
- Elective units
Units
BSBPMG511 Manage project scope
BSBPMG512 Manage project time
BSBPMG513 Manage project quality
BSBPMG514 Manage project cost
BSBPMG515 Manage project human resources
BSBPMG516 Manage project information and communication
BSBPMG517 Manage project risk
BSBPMG521 Manage project integration
BSBINM501 Manage an information or knowledge management system
BSBINN502 Build and sustain an innovative work environment
BSBMGT516 Facilitate continuous improvement
BSBPMG518 Manage project procurement
BSBPMG519 Manage project stakeholder engagement
BSBPMG520 Manage project governance
BSBSUS501 Develop workplace policy and procedures for sustainability
BSBWHS506 Contribute to developing, implementing and maintaining WHS management systems
BSBWOR501 Manage personal work priorities and professional development
BSBWOR502 Lead and manage team effectiveness
ICTICT511 Match ICT needs with the strategic direction of the enterprise
ICTICT515 Verify client business requirements
MSS015002A Develop strategies for more sustainable use of resources
PSPETHC501B Promote the values and ethos of public service